PETERBILT 362 HEAVY TRUCK

2000 with N14 Cummins Engine

Must Identify By OEM Number

With C15 Cat Engine

Must Identify By OEM Number

Models with Red Dot A/C or Red Dot Fan Switch Resistor

12 Volt, Single Speed, 2 Wire Motor with 5/16" Shaft, Vented Motor

12 Volt Single Speed 2 Wire Motor, CCW

12 Volt Single Speed 2 Wire Motor - With Kysor Roof Unit

12 Volt Single Speed, 2 Wire Motor, Vented Motor - With Red Dot A/C

12 Volt, Single Speed, 2 Wire Motor with 5/16" Shafts

12 Volt, Single Speed, 2 Wire Motor with 3/8" Shafts

Models with Red Dot A/C - Match up by Dimensions

Match up by OEM Number and Dimensions

8" X 19 1/4" Filter

10 1/2" X 7 1/2" X 3/4" Filter

10 1/4" X 7" X 3/4" Filter

Cabovers, Must Match up by Dimensions and Illustration

Fits Compressor: 59-7426HD and 59-7426AP

1 Wire, Gauge Line 1.66C, 2.28F

1 Wire, Gauge Line 1.91

1 Wire, Gauge Line 1.66C, 2.28F

2 Wire, Gauge Line 1.66C, 2.28F

2 Wire, Gauge Line 2.06C, 2.35F

2 Wire, Gauge Line 2.40C, 2.70F

2 Wire, Gauge Line 1.93C, 2.45F

Replaces all LH Suction York/Tech 2 Groove Clutch Compressors with Sanden Compressor

Aftermarket Sanden
• 10 Groove, 126mm Clutch
• GQ Rear Head

Can Use Super SHD Sanden - 59-10424HD

Original Equipment
Super Heavy Duty Sanden
• 10 Groove, 126mm SHD Clutch
• GQ Rear Head

Can Use AP Series Compressor - 59-10424AP

Original Equipment Sanden
• 2 Groove, 132mm HD Clutch
• JD Rear Head

Can Use AP Series Compressor - 59-2108AP

Aftermarket Sanden
• 2 Groove, 132mm Clutch
• JD Rear Head

Can Use HD Sanden - 59-2108

Original Equipment Sanden
• 2 Groove, 125mm HD Clutch
• GQ Rear Head

Can Use Aftermarket Sanden - 59-2411AP

Aftermarket Sanden
• 2 Groove, 125mm Clutch
• GQ Rear Head

Can Use HD Sanden - 59-2411

Aftermarket Sanden
• 6 Groove, 125mm Clutch
• Direct Vertical Mount, 2 Wire

Can Use HD Sanden - 59-6416
Can Use Super SHD Sanden - 59-6416HD
Can Use SHD Aftermarket Sanden - 59-6416AP

Original Equipment Sanden
• 6 Groove, 125mm SHD Clutch
• Direct Vertical Mount, 2 Wire

Can use HD Sanden - 59-6416
Can Use Aftermarket Sanden - 59-6416AM
Can use SHD Aftermarket Sanden - 59-6416AP

Aftermarket Sanden
• 6 Groove, 125mm Clutch
• Direct Horizontal Mount, 2 Wire
• GSA Rear Head

Can Use HD Sanden - 59-6418
Can Use Super SHD Sanden - 59-6418HD

Original Equipment Sanden
• 6 Groove, 125mm SHD Clutch
• Direct Horizontal Mount, 2 Wire
• GSA Rear Head

Can Use HD Sanden - 59-6418
Can Use Aftermarket Sanden - 59-6418AP

Aftermarket Sanden
• 7 Groove, 126mm Clutch
• WX Rear Head

Can Use Super SHD Sanden - 59-7426HD

Original Equipment
Super Heavy Duty Sanden
• 7 Groove, 126mm SHD Clutch
• WX Rear Head

Can Use SHD Alternative Sanden - 59-7426AP

Aftermarket Sanden
• 8 Groove, 119mm Clutch
• GQ Rear Head

Can Use HD Sanden - 59-8419
Can Use Super SHD Sanden - 59-8419HD
Can Use Super SHD Aftermarket Sanden - 59-8419AP

Original Equipment Sanden
• Ear Mount, 2 Wire Male Metri-Pack
• 8 Groove, 119mm HD Clutch
• GQ Rear Head

Can Use AP Series Compressor - 59-8409AP

Aftermarket Sanden
• 8 Groove, 119mm Clutch
• GQ Rear Head

Can Use HD Sanden - 59-8409

Original Equipment
Super Heavy Duty Sanden
• 8 Groove, 119mm Clutch
• GQ Rear Head

Can use HD Sanden - 59-8419
Can use AP Series Compressor - 59-8419AP

Aftermarket Sanden
• 8 Groove, 119mm Clutch
• 2 Wire Male Metri-Pack
• GSA Rear Head

Can Use Super SHD Sanden - 59-8422HD

Original Equipment Sanden
• 8 Groove, 119mm SHD Clutch
• 2 Wire Male Metri-Pack
• GSA Rear Head

Can Use Aftermarket Sanden - 59-8422AP

Bracket has 2 Holes

Serpentine, Non-Serviceable Design

Check Dimensions

Serpentine, Non-Serviceable Design

Must Identify By OE Number

With Signet A/C Unit

Includes Expansion Valve - 92-124

O-Ring Exp. Valve - 93-247

With Red Dot AC

Color - Orange, Size - .057

All With Block Type, Sleeper Units

1996-2008 With Long Life "Red"

2005-2010

1983-2000

2005-2010

For 3/4" Inlet and Outlet Fittings

With 5/8" Inlet and Outlet Fittings

With 3/4" Inlet and Outlet Fittings

Includes Adapter Fittings for 3/4" or 5/8" Applications

Single Application Kit
Includes 14 O-Rings

• Normally Open
• Opens: 21 psi.
• Closes: 40 psi.
• M12 x 1.50

• Normally Open
• Opens: 200 psi.
• Closes: 270 psi.
• M10 x 1.25

OE is Orange color, New switch is Yellow
• Normally Closed, Fan Override
• Opens: 310psi.
• Closes: 240psi.

• Normally Closed
• Opens 250 psi
• Closes 100 psi
• 7/16" x 20 Thread

Pressure Side and Fan Side Normally Open

Pressure Side Normally Open, Fan Side Normally Closed

Pressure Side and Fan Side Normally Open

Pressure Side and Fan Side Normally Open

Pressure Side Normally Open, Fan Side Normally Closed

2003-2010 w/ Behr Cooling Module

2003-2010 w/ Behr Cooling Module

• 3" x 10" Male O-Ring

Can Use Aftermarket Version 83-414

Conventional Models

Conventional Models With Metric Charge Ports

Can Use Standard Version - 83-522

Can Use Standard Accumulator 85-410

Can Use Standard Accumulator 85-412

Short Thread

Closes 35 psi. Opens 15 psi, Normally Open

Opens 30 psi. Closes 30 psi., Low Pressure on High Side of System

Model Series with Blower Relay

All Models with Red Dot A/C

With Bunk Thermostat Switch