PETERBILT 359 HEAVY TRUCK

With C15 Cat Engine

Must Identify By OEM Number

2000 with N14 Cummins Engine

Must Identify By OEM Number

L6 11.1 Engine

12 Volt, Single Speed, 2 Wire Motor with 5/16" Shaft, Vented Motor

12 Volt, Single Speed, 2 Wire Motor with 5/16" Shaft, Vented Motor

12 Volt Single Speed 2 Wire Motor, CCW

12 Volt, Single Speed, 2 Wire Motor with 5/16" Shaft

12 Volt, Single Speed, 2 Wire Motor with 5/16" Shafts

Models with Red Dot A/C or Red Dot Fan Switch Resistor

Short Thread

Main Sleeper Unit

Match up by OEM Number and Dimensions

8" X 19 1/4" Filter

10 1/2" X 7 1/2" X 3/4" Filter

10 1/4" X 7" X 3/4" Filter

2008-2013

1 Wire, Gauge Line 1.66C, 2.28F

1 Wire, Gauge Line 1.91

1 Wire, Gauge Line 1.66C, 2.28F

2 Wire, Gauge Line 1.66C, 2.28F

2 Wire, Gauge Line 2.06C, 2.35F

2 Wire, Gauge Line 2.40C, 2.70F

2 Wire, Gauge Line 1.93C, 2.45F

Replaces all LH Suction York/Tech 2 Groove Clutch Compressors with Sanden Compressor

Original Equipment Sanden
• 2 Groove, 132mm HD Clutch
• JD Rear Head

Can Use AP Series Compressor - 59-2108AP

Original Equipment Sanden
• 2 Groove, 125mm HD Clutch
• JDA Rear Head

Can use AP Series Compressor - 59-2115AP

Original Equipment Sanden
• 2 Groove, 125mm HD Clutch
• GQ Rear Head

Can Use Alternative Sanden - 59-2411AP

33" Long Side Brackets With 4 Bolts Can Use TC430281 Tube and Fin Design

Parallel Flow, Non-Serviceable Design

Full Length Mounts with HD Mount Blocks on Each Side for Additional Support Can Use TC430281 Tube and Fin Design

Parallel Flow, Non-Serviceable Design

Bracket has 2 Holes

Serpentine, Non-Serviceable Design

Check Dimensions

Serpentine, Non-Serviceable Design

33" Long Side Brackets With 4 Bolts Can Use TC42627 Parallel Flow Design

Must Identify By OE Number

With Signet A/C Unit

Includes Expansion Valve - 92-124

O-Ring Exp. Valve - 93-247

Color - Orange, Size - .057

Color - Red, Size - .062

1996-2008 With Long Life "Red"

2005-2010

1983-2000

2005-2010

For 3/4" Inlet and Outlet Fittings

With 5/8" Inlet and Outlet Fittings

With 3/4" Inlet and Outlet Fittings

Includes Adapter Fittings for 3/4" or 5/8" Applications

Single Application Kit
Includes 14 O-Rings

• Normally Open
• Opens: 23 psi.
• Closes: 47 psi
• M12 x 1.50

• Normally Open
• Opens: 21 psi.
• Closes: 40 psi.
• M12 x 1.50

• Normally Closed
• Opens: 330-370 psi.
• Closes: 180-240 psi.

• Normally Open
• Opens: 200 psi.
• Closes: 270 psi.
• M10 x 1.25

OE is Orange color, New switch is Yellow
• Normally Closed, Fan Override
• Opens: 310psi.
• Closes: 240psi.

• Normally Closed
• Opens 250 psi
• Closes 100 psi
• 7/16" x 20 Thread

Opens 30 psi. Closes 30 psi., Low Pressure on High Side of System

Pressure Side and Fan Side Normally Open

2.5" Diameter With Quick Disconnect

13-210 Mid-Ranger

13-210 Mid-Ranger

Midliner With Charge Port

With Red Dot Unit With Switch

With Top Charge Port Switch

Can use Aftermarket Drier - 803-3291
Can use OE Parker Drier - 803-329P

Various Models With Standard R12 - 7/16" Charge Ports

With Quick Disconnect

• 3" x 10" Male O-Ring

Can Use Aftermarket Version 83-414

Conventional Models With Metric Charge Ports

Conventional Models With Metric Charge Ports

Can use Aftermarket Drier - 83-522

Length 2.575", Width 1.250"

Model Series with Blower Relay

All Models with Red Dot A/C

All Series with Red Dot Bunk Unit