CASE/IH 1822 COMBINE

With York Compressor

With York and Sanden Compressors

With York and Sanden Compressor

With York and Sanden Compressors

With York Compressor

With Sanden Compressor

With Sanden Compressor

3/8" Double Shaft 2 Wire Motor With Brackets, Replaces 2 Wire Motors with 2 7/16" or 2 5/16" Stud Spans

Original Replacement Motor, Will Only Replace Motors with 2 7/16" Stud Span, Can Use BM20050 Which Replaces both Stud Spans

High Efficiency Blower Update Kit For All Serial Numbers, Replaces Original Assembly On Combines With 4 or 2 Wire Motor, Applications with 2 Wire Motor Must Bypass Resistor and Wire Direct to Switch

LH Side, Counter Clockwise Rotation Looking at Shaft End

RH Side, Clockwise Rotation Looking at Shaft End

Sealing Foam for Roof Access Panel

Quantity 4 Required

Standard Duty Single Row Bearing

Heavy Duty Double Row Bearing

Serial Number JJC00126 and Above, Optional R134a Compressor

Serial Number JJC00126 and Above, Optional R134a Compressor

Felt Coil Dust Seal - York and Tecumseh

Includes Seal Alignment Tool and Felt Coil Dust Seal

Bearing Width - .629

Standard Seal Kit

Bearing Width - 1.061

Carbon Style Shaft Seal Kit, Original R12 Compressor

Original R12 Compressor

Lip Style Shaft Seal Kit, Optional R134a Compressor

Kit Includes 509-560 Compressor, Receiver Drier, Expansion Valve, and O-Rings

Can Use Aftermarket Kit - 890-56013

Serial Number JJC00126 and Above, Optional R134a Compressor - O-Ring

Serial Number JJC00126 and Above, O-Ring

With O-Ring Fittings and Flare Adapters

Includes 903-705 Expansion Valve

With Manual Temp Control

Serial Number JJC0012691 and Above

Can Use R134 Update Switch - 220-30601

Serial Number JJC0012691 and Above, Shuts Compressor Off at 340 psi Instead of 400 psi

Works on Blower Switch, Thermastatic Switch, Heater Control and Wiper Switch