FORD/NEW HOLLAND TW30 TRACTOR

08/01/1976 to 07/31/1981

08/01/1976 to 10/31/1981

08/01/1976 to 12/31/1978

08/01/1976 to 10/31/1981

08/01/1976 to 12/31/1978

01/01/1979 and Newer

01/01/1979 and Newer

08/01/1976 to 12/31/1978

08/01/1976 to 10/31/1981

11/01/1981 and Newer

08/01/1976 to 10/31/1981

11/01/1981 and Newer

01/01/1979 and Newer

08/01/1976 to 12/31/1978 With Rotolock Compressor, Roof Hoses Not Included

01/01/1979 and Newer, Roof Hoses Not Included

01/01/1982 and Newer, 3-Terminal

01/01/1982 and Newer, 4-Terminal

01/01/1982 and Newer, Used in E0NN18456BA Blower Assembly

08/01/1976 to 12/31/1981, 3/8" Double Shaft 4 Wire

With BW212 and BW216 Wheels
3/8" Double Shaft 4 Wire

High Efficiency Blower Assembly, Replaces 2 and 4 Wire Motors

01/01/1982 to 12/31/1985, Left Hand Counter Clockwise

01/01/1982 to 12/31/1985, Right Hand Clockwise

Additional Cutout Options are Marked on Backside of Floormat

Fits Series 1 Cabs Only, 1 Piece Foam/Vinyl Headliner Formed to a Plastic Mold, For Spacers Order Part Number CK7077-H16

With Small Metal Toolbox

With Large Padded Toolbox

Must Identify by Dimensions

Must Identify by Dimensions

For Filter without Slots for Mounting Clips - 320-1806

08/01/1976 and Newer, Single Row Bearing

08/01/1976 and Newer, Double Row Bearing

08/01/1976 and Newer, York and Tecumseh

Includes Seal Alignment Tool and Felt Coil Dust Seal

08/01/1976 and Newer, York and Tecumseh, Bearing Width - .629

08/01/1976 and Newer

08/01/1976 Standard Seal Kit

08/01/1976 and Newer, York and Tecumseh, Bearing Width - 1.061

01/01/1979 and Newer With Tube O Compressor

Can Use Alternative Version 990-230AP

08/01/1976 to 12/31/1978 With Rotolock Compressor

Can Use Alternative Version 990-245AP

Replaces Tube O and Rotolock Compressors - Use Original Hoses - May Require Bracket Modification - See Service Department

Can Use Alternative Version 990-9002AP

Replaces all LH Suction York/Tech 2 Groove Clutch Compressors with Sanden Compressor 6" Clutch

01/01/1979 and Newer with Tube-O Compressor
Use Original Hoses - May Require Bracket Modification - See Service Department

08/01/1976 to 12/31/1978

08/01/1976 to 12/31/1978

08/01/1976 to 12/31/1978

01/01/1979 and Newer

Must Identify By Dimensions and Mounting Bar

08/01/1976 to 12/31/1978
Must Identify By Dimensions - May Require Attaching Mounting Bar From Original Condenser To New Condenser

01/01/1979 and Newer

08/01/1976 to 10/31/1981

08/01/1976 and Newer

Headlamp Flood and Rear Fender

01/01/1979 and Newer, without Oil Cooler

For Radiator Foam Seal Kit RF2144

Includes Quick Coupler 451-1001 Fitting

08/01/1976 to 10/31/1981

With Mounting Bracket

Must Reuse Original Quick Coupler Fitting

08/01/1976 to 10/31/1981

With Mounting Bracket

11/01/1981 and Above
Without Mounting Bracket

08/01/1976 and Newer

08/01/1976 and Newer