Air Conditioning Parts and Supplies
Roof Mounted Receiver Drier
Single Speed, 2 Wire, with Stolper Cab
5/16" Double Shaft 2 wire, With Factory Cab
3/8" Double Shaft 4 Wire Ball Bearing Motor, With Hiniker Cab and Year-A-Round Cab
With Year-A-Round Cab
With Double Blower Motors Replaces Both Original BM20013 Blower Motors
Can use HD Blower Motor with Wheels - BM20013HDK Can use HD Blower Motor without Wheels - BM20013HD
Year a Round QT1 Cab 1/8" Textured Rubber Top with a 1/2" Foam Bottom
Year a Round Cab 1/8" Textured Rubber Top with a 1/2" Foam Bottom
Hiniker Cab 1/8" Textured Rubber Top with a 1/2" Foam Bottom
For Models That Do Not Have a Rear Left Storage Compartment
9 Pieces Included in this Kit
For Models That Do Not Have a Rear Left Storage Compartment Large Cutout on the Lower Rear of Each Fender Piece
For Models That Do Not Have a Rear Left Storage Compartment At The Floor, The Measurement of the Front Portion of Each Fender Should Measure 4"
At The Floor, The Measurement of The Front Portion of Each Fender Comes to a Point
Fits Original A6 Compressor Use 610-112 Coil
Fits Heavy Duty Delco Replacement, 500-075
With Steel Wear Plate
With Ceramic Wear Plate
Plastic Dust Cover With Screws - Fits Original A6 Compressor
Fits Original A6 Compressor
Used with Sanden Style Conversion Kit
Used with Original A6 Compressor
Uses Original Hoses, Includes 220-043 Harness for Roof Mounted Low Pressure Switch, (For Seltec Compressor Order 990-403S)
For Kit with OE Sanden Compressor 990-404
Uses Original Hoses, Includes 220-043 Harness for Roof Mounted Low Pressure Switch
For Kit with Aftermarket Compressor 990-403
Can Use Reman A6 Compressor - 500-001
Can Use HD A6 Replacement with Hi & Lo Pressure Switches - 500-0752
Uses Original Hoses, For Optional Roof Mounted Low Pressure Switch Kit - Must Order 220-043 Wire Harness
Stolper Cab with Serial Number 208300 and Above
Must Identify By OEM Number
Headlamp Flood and Rear Fender
Requires 2 Straps per Radiator (Sold in 2 Pack)
For Pack of 6 Order RF28015-6
With A/C
Serial Number 303519 and Above Without A/C
R12 & R134a Compatible
Can Use 3 Speed Update Switch Kit 205-295
A6, S6 Compressor - Used with Original Super Heat Switch Only
Can use on our 990-403, -404, -405, -406, -412 Conversion Kits
Use with OE A6, 500-001
Use with 500-075 Only
Protects System for High Pressure over 330 and Low Pressure Under 15 on High Side of System Only
Used with Original A6 Compressor, Complete Hi and Lo Side Pressure Protection Kit
Mounts In The Pressure Relief Valve Port On The Rear Head
Requires Low Side Cab Roof Hose Equipped with Charge Port for Low Pressure Switch, Can Order a 530-4052, which Includes a 7-161224 Hose
Includes 451-5093 Inline Charge Port Adapter, For Applications Without Charge Port on Suction Hose
Includes 7-161224 Cab Roof Suction Hose Equipped with Charge Port for Pressure Switch
Must Identify by OE Number
Fits Models with 6404T Diesel Engines