JOHN DEERE 4000 TRACTOR

With Hinson Cab
Early Model Tractors Can Eliminate Back Seat Service Valve By Ordering 7-58483 Suction Hose and 995-455 Hold Down Plate

Roof Mounted Receiver Drier

With Hinson Cab
Early Model Tractors Can Eliminate Back Seat Service Valve By Ordering 7-57318 Discharge Hose and 995-455 Hold Down Plate

Cab Serial Number 208300 and Above

Use With Blower Assembly BM4036

Single Speed, 2 Wire, with Stolper Cab

5/16" Double Shaft 2 Wire

5/16" Double Shaft 2 Wire

Might Require 2 per Application
5/16" Double Shaft 2 Wire

With Double Blower Motors
Replaces Both Original BM20013 Blower Motors

Can use HD Blower Motor with Wheels - BM20013HDK
Can use HD Blower Motor without Wheels - BM20013HD

Fits BM20013

Serial Number 208300 and Above
Hinson Cab

Year a Round QT1 Cab
1/8" Textured Rubber Top with a 1/2" Foam Bottom

Year a Round Cab
1/8" Textured Rubber Top with a 1/2" Foam Bottom

Hiniker Cab
1/8" Textured Rubber Top with a 1/2" Foam Bottom

For Models That Do Not Have a Rear Left Storage Compartment

9 Pieces Included in this Kit

For Models That Do Not Have a Rear Left Storage Compartment
Large Cutout on the Lower Rear of Each Fender Piece

For Models That Do Not Have a Rear Left Storage Compartment
At The Floor, The Measurement of the Front Portion of Each Fender Should Measure 4"

At The Floor, The Measurement of The Front Portion of Each Fender Comes to a Point

Fits Original A6 Compressor
Use 610-112 Coil

Fits Heavy Duty Delco Replacement, 500-075

With Steel Wear Plate

With Ceramic Wear Plate

Plastic Dust Cover With Screws - Fits Original A6 Compressor

Fits Original A6 Compressor

Fits Original A6 Compressor

Used with Sanden Style Conversion Kit

Uses Original Hoses, Includes 220-043 Harness for Roof Mounted Low Pressure Switch, (For Seltec Compressor Order 990-403S)

For Kit with OE Sanden Compressor 990-404

Uses Original Hoses, Includes 220-043 Harness for Roof Mounted Low Pressure Switch

For Kit with Aftermarket Compressor 990-403

Can Use Reman A6 Compressor - 500-001

Can Use HD A6 Replacement with Hi & Lo Pressure Switches - 500-0752

Uses Original Hoses, For Optional Roof Mounted Low Pressure Switch Kit - Must Order 220-043 Wire Harness

Serial Number 201000 and Above

Must Identify By OEM Number
Tractor Serial Number 201000 and Above With Stolper and Hinson Cabs, Stolper Cab With Serial Number 208300 and Above

Must Identify By OEM Number
Tractor Serial Number 201000 and Above With Stolper Cab

Headlamp Flood and Rear Fender

Serial Number 250000 and Above

Serial Number 217839 thru 249000

Requires 2 Straps per Radiator (Sold in 2 Pack)

With Upper Tank Holes For Propane Engine Only

For Radiator Foam Seal Kit RF5550

Gas and Diesel, Serial Number 201000 & Above
For Radiator Foam Seal Kit RF5550

For Pack of 6 Order RF28015-6

Self Adhesive Foam Parts for Easy Install

Can Use 3 Speed Update Switch Kit 205-295

Replaces Tandom Style Switch 205-165

A6, S6 Compressor - Used with Original Super Heat Switch Only

Can use on our 990-403, -404, -405, -406, -412 Conversion Kits

Use with OE A6, 500-001

Use with 500-075 Only

Protects System for High Pressure over 330 and Low Pressure Under 15 on High Side of System Only

Used with Original A6 Compressor, Complete Hi and Lo Side Pressure Protection Kit

Mounts In The Pressure Relief Valve Port On The Rear Head

Requires Low Side Cab Roof Hose Equipped with Charge Port for Low Pressure Switch, Can Order a 530-4052, which Includes a 7-161224 Hose

Includes 451-5093 Inline Charge Port Adapter, For Applications Without Charge Port on Suction Hose

Includes 7-161224 Cab Roof Suction Hose Equipped with Charge Port for Pressure Switch